Help
What things mean, in plain words. Can't find it? Email alex@steadyworkhq.com.
The basics
What does Steadywork do?
It takes over admin work that repeats. You tell it about your week, it shows you what is worth handing over, and it prepares the emails, reports or entries for you. You decide what goes out.
What is an automation?
One repeating job you have handed over. For example: "every Monday, read the list of unpaid invoices and draft a reminder to each customer who is more than 14 days late." It runs when you choose, reads the data you point it at, and prepares drafts.
What is a draft?
Something it has prepared and not yet acted on: an email, a document, or an entry for one of your systems. Drafts wait in your Drafts page until you approve, change or dismiss them.
Where do I start?
Your account page shows a "Getting started" list with the next step. The quickest route is: do the interview, look at the ranked list, pick a ready-made automation, and review its first drafts.
Approving, and letting it run on its own
Does anything go out without me?
Not unless you tell it to. Every automation starts out waiting for your approval. On its tuning page, under "Approval", you can let one act without waiting. It then still follows your rules, holds back anything that looks wrong, and emails you what went out after every run.
What happens when I approve an email?
You choose once, and can change it any time: send them yourself, have them placed in your own Drafts folder, or have them sent from your mailbox. The last two need your mailbox connected.
What is an entry, and how is it confirmed?
An entry is something written into one of your systems, such as a supplier bill in your books or a row in a sheet. Each one has its own confirmation screen listing exactly what will be created. Nothing is written until you press the button there.
Can I change a draft before approving?
Yes. Edit one, or change a whole batch at once with find-and-replace. If you make the same change twice, it offers to make that a standing rule.
AI, and running without it
What do the labels mean?
"Written by AI" means the AI wrote that draft from your data, so read it with care. "Fixed steps, no AI" and "Fixed program, no AI" mean it was produced by set instructions you approved: the same data always gives the same result.
What is a fixed program?
Once an automation has been right for a while, the AI can write its job down once as a small program. You see what it does in plain words, a trial on your own data, and a check against what the AI would have written. If you switch, the program does the job from then on with no AI.
Why would I want that?
It costs no credits to run, and it gives the same answer every time. Writing it uses credits once. As more of your automations become fixed programs, your bill can come down too: see "How can I pay less?"
Which AI model should I pick?
Most capable for anything needing judgement or where a mistake is costly. Balanced for routine drafts. Fastest for simple, repetitive work from clean data. You can change it on the tuning page and try it without saving.
Credits and plans
How do referrals work?
On your "Plan and credits" page there is a link and a code that are yours. Send either to another business. They sign up with it (no invitation needed) and get $20 off their plan each month for their first 3 months. When they pay their second month, you get $20 off your plan each month for 3 months too, automatically. Each new customer you bring adds 3 more months, up to 12 months ahead. The discount is on the monthly plan, not on extra credits, and a code has to be added before the new customer's first plan.
What is a credit?
A measure of AI use. One credit is one cent's worth. Each time the AI works for you it uses some. Your "Plan and credits" page shows your balance and where they went.
What uses credits, and what does not?
Uses credits: the interview, the ranked list, any draft the AI writes, the website chat's answers, and writing a fixed program or suggesting what to track. Uses none: automations running as fixed steps or a fixed program, tracking numbers for your dashboard, and everything you do yourself.
Is there a limit on how many automations I can have?
Not on a plan. Have as many as your business needs. The ones that use AI draw on your credits each time they run; the ones that run as fixed steps or a fixed program use none. Before you choose a plan, you can have up to 25.
How many credits will an automation use?
Each automation that the AI writes shows what it usually uses a run and exactly what its last run used, on the Automations page and its tuning page; "Every run" lists each run's exact use. A run that reads more data or writes more drafts uses more, so before a run the figure is an estimate, not a promise. Automations that run as fixed steps or a fixed program use none.
What is Team Pro?
A team plan for a team that uses a lot of AI: 65,000 credits a month for $499, shared, six and a half times as many as Team. If your team's use has fitted in Team for three months in a row, the plan page suggests moving down to save money.
What is Pro?
A plan for one person who uses a lot of AI: 25,000 credits a month for $199, ten times as many as Solo. If your use has fitted in Solo for three months in a row, the app tells you, with a button to move.
Can I change my plan?
Yes, on "Plan and credits", whenever you like. A move to a cheaper plan starts at your next renewal, so nothing is charged and you keep what you have paid for until then. A move to a bigger plan starts straight away: you pay its full price, and its credits start that day. The unused part of the month you had paid for comes off your next payment: its price times whichever is smaller, the part of the month left or the part of its credits left. If the card is declined, nothing changes.
How can I pay less?
Turn the automations that have been right for a while into fixed programs. They then run with no AI and use no credits. Once your AI use has fitted in Lite for three months in a row ($39 a month with 500 credits, or Team Lite at $119 with 2,000), your account page and "Plan and credits" say so, with a button that moves you at your next renewal.
Is there a limit on top-ups?
Yes, for newer accounts: up to $200 of top-ups a month, or one month of your plan if that is more, until you have paid 3 renewals, then $1,000, and $5,000 after 12. It covers credits you buy yourself and automatic top-ups together. If you need more sooner, write to us.
What if my renewal payment fails?
The new month's credits wait until the payment goes through, and you get an email. Your card is tried again over a few days; to fix it sooner, press "Receipts and card details" on Plan and credits. Automations that run without AI carry on, and credits you bought stay.
Will my credits last the month?
The app works it out from how often each automation that uses AI runs and what its recent runs cost. If they need more than your plan gives, "Plan and credits" and your account page say so, with what top-ups would cost, a plan that would cover it, and the automations using the most, and you get one email a month about it.
What happens when I run out?
AI work pauses and you are emailed. Automations that use no AI keep running. Nothing is charged unless you add credits yourself, or you have switched on automatic top-ups with a monthly limit you set.
Can it run without sending my data to a cloud AI?
Two ways. Automations that have become fixed steps or a fixed program never use any AI. And if you have someone technical, you can run the AI work on a model server of your own: on "Your own AI key", open "Advanced". Your data then goes to your server and nowhere else. Open models are less capable than Claude, files are handed over whole up to about 150 KB a run, and PDFs cannot be read.
Can I use my own AI account?
Yes, if you have an Anthropic developer account. Add your key under "Your own AI key". Your AI use is then billed to you by Anthropic and uses no credits here.
Teams
How do I start a team?
On "Plan and credits", switch to "For a team" and choose a team plan. Then, under "Your team", invite up to 9 people by email. The owner pays, and everyone in the team draws on its credits.
I already use Steadywork. Can I join a team?
Yes. Ask the team's owner to invite your email address. The email has a link that shows exactly what changes before you join. You keep your login and everything in your account. If you pay for a plan of your own, it stops renewing and still covers you to the end of the month you paid for; then the team's plan does.
What can the team's owner see?
Your interviews, and your automations: the owner can have someone in the team cover one while you are away, or take it over. Your login, connections and everything else in your account stay yours.
How do I leave a team?
Under "Your team", press "Leave the team". It happens straight away, and everything in your account stays yours. Until you choose a plan of your own, your automations are kept as they are but do not run.
Can the owner take someone out of the team?
Yes, under "Your team". It happens straight away: the team's plan stops paying for their work, and they keep everything in their account and are told by email.
Can a team split into separate accounts?
Yes. The owner presses "Split the team" under "Your team" and chooses their own plan from then. It happens when the team's plan renews, so the month already paid for is used. Everyone is told straight away and again on the day, and each person then chooses a plan of their own. Until the day, the owner can keep the team together instead.
Your data and your systems
What can it read?
Files you upload or email in, and any system you choose to connect. When connecting, it asks only for what the job needs, one permission at a time. The Connections page shows what each connection is and is not allowed to do.
What file types work?
CSV and Excel (.xlsx, .xlsm, .xls) work everywhere. When the AI does the work, it gets the whole workbook and can read every sheet. Fixed steps, fixed programs and tracking read the first sheet, with the first row as column names. PDFs (up to 10 MB and about 100 pages), photos (up to 5 MB each) and Word files can be read when the AI writes the draft, but not by fixed steps or programs. One run can take up to 25 MB of photos and documents together.
How big can a report be?
When the AI does the work: up to 25 MB for one report or workbook, and 50 MB of tables in one run. That is a few hundred thousand rows of a typical export. The AI works through the file with code rather than reading every line itself, which is why it can take this much. Fixed steps, fixed programs and tracking run on Steadywork's own server and take up to 1 MB, about 9,000 rows. If a report is bigger than that, keep that automation on the AI. Your reports storage holds 5 GB for each person on a plan (1 GB before you choose one). Your account page shows how much is used; remove older files there under "Recently received".
Where does my data go?
To prepare a draft, the data an automation reads is sent to Anthropic, whose AI we use. What Anthropic does with it is set out on Anthropic's own privacy pages for business products (privacy.claude.com); our Privacy Policy links to them. Steadywork itself does not use your data to train AI models, sell it, or use it for advertising.
How do I get my data out, or delete it?
Under "Security and your data" you can download your data: your details, what you told it, your instructions and rules, and your drafts. You can also delete the account and all of it.
What happens to my automations if I leave?
They run on Steadywork and are part of your plan. If your plan ends they are kept as they were but stop running, and start again if you come back. If you delete your account they are removed. The programs that run them are not something you download.
Not sure how to set it up?
I know the chore but not how to automate it.
That is what "Describe what you need" is for. Open Automations and press it. Say the chore the way you would to a colleague: what it is, when it comes up, what makes it annoying. You get back a set-up to check, with ideas you may not have thought of, such as when it should start, which items should count, and how to stop the same person being emailed twice. Nothing is created until you say so.
Apps
Which apps can I connect?
Open Connections, then "See all apps". More than five hundred apps are listed, such as QuickBooks, Asana, monday.com, Notion, Airtable, Dropbox, Stripe, Square and Calendly. Type a name in the box at the top to find one. Each has one Connect button. You sign in on that app's own page, so we never see your password for it.
What can an automation do in a connected app?
On its own, it can only look things up, and only with what the app itself marks as reading only. If you ask it to change something, such as creating a task, it prepares the change and waits. You see exactly what will be done and press a button; it is then done once. An automation set to act on its own still never makes a change in an app by itself.
How do I use a connected app in an automation?
Start a new automation. Under "What it reads", choose "Look things up in" followed by the app's name. To have it prepare changes, choose "Something to do in a connected app" under "What comes back" and pick the app.
Why does looking things up use more credits?
With a report, the AI reads one file. With an app, it works step by step: it asks the app something, reads the answer, and asks again. Each step counts. If the same information can be exported as a report, uploading the report costs less.
It says the app is connected for looking things up only.
That is how every app starts. To let automations prepare changes for you to confirm, open Apps, open the app, and press "Allow changes". You sign in to the app once more and are asked for the extra permission.
Can an automation move money in my bank or payments app?
Only if you choose to let it prepare that. Every app starts as looking things up only. If you press "Allow changes" on an app that holds money, an automation can prepare a payment, refund or transfer, and nothing happens until you read it and confirm it yourself. It is never done on its own.
Can I connect my payroll or hiring app?
Yes. Because those hold personal details about staff and applicants, you are asked to confirm first that you are allowed to use them this way. Do not ask an automation for Social Security numbers, bank details or health information.
Can I connect Salesforce?
Yes, with one step by your Salesforce administrator first. Salesforce asks every business to add outside products itself. Open Apps, find Salesforce and press "Set up": the page gives the steps word for word and boxes for the three things Salesforce gives you. It needs Salesforce Enterprise Edition or above.
Can it read my Gmail?
Not directly yet. Google reviews every product before it may read Gmail, and that review is not finished. Until then there are three ways: if you use Superhuman Mail, connect that; if you have a Zapier, Pipedream or Composio account with Gmail connected, connect that under "Services that connect other apps"; or forward the emails that matter to your reports address.
Can I reach an app that is not listed, through Zapier or Make?
Yes. Zapier, Make, IFTTT and Pipedream are on the list under "Services that connect other apps". If you already use one of them, connect it and an automation can use the apps you have set up there, Gmail included.
An app says "Not available yet".
Its maker asks each product to register with them before anyone can connect. Until that is done for Steadywork, use a report from that app instead: export it and upload it under Regular reports.
Why can it not start "when new data arrives" with an app?
Looking something up live gives it nothing to compare with last time, so it cannot tell that something is new. Choose every day, every week or every month.
How do I disconnect an app?
Open Apps, open the app, and press Disconnect. The app is told the access is no longer wanted, the sign-in is forgotten here, and drafts made with it are removed after 30 days.
Getting more out of it
Can I approve from my phone without signing in?
Yes. The "drafts ready" email has a link that opens that batch on one page with a single Approve button. Opening the link changes nothing; only pressing the button approves. It works for seven days and approves once. If you use two-step sign-in, the link is not sent and you sign in as usual. Entries are always confirmed one at a time on their own screens.
Can a reminder include a way to pay, or the invoice itself?
If your invoices come from QuickBooks and take online payment, each one carries its pay link and the email can include it. You can also have the invoice attached as a PDF: switch it on under "Attach the invoice" on the automation's tuning page. An invoice is attached only when it belongs to the address the email is going to and its number appears in the email. If that is not certain, nothing is attached.
How do I stop it chasing the same person too often?
On the tuning page, under "Don't write too often", choose how many days must pass before the same person is emailed again by that automation. Each run says how many were left out for this reason.
What if a customer has already replied?
If you have allowed it to read your Outlook inbox, a draft to someone who has written to you since your last email to them is marked with a warning, and is never sent without you, even on an automation set to act on its own. Gmail inboxes are not read.
Can it read my calendar?
Yes, for Outlook and Google calendars: the next seven days of appointments, read-only, in your own time zone. Choose it under "What it reads" when you create an automation, and allow it when asked.
My software is not on the Connections list. Can it still be used?
First look under Connections, "See all apps": more than five hundred more connect with one button. If it is not there either, yes, it can still be used. The simple way needs nothing technical: save a report from it as an Excel or CSV file and upload it under Regular reports on your account page. Your automations read it like anything else. If you want a live link and are comfortable setting up software, there is a second way. Under Connections, "Data from other tools" gives you a private web address. Almost any tool can send data to an address like that when something happens, on its own or through a service such as Zapier or Make. What arrives builds up into a table your automations can read, and be started by. Treat the address like a password.
How do I get my data into Steadywork?
Open Automations and press "Where is your data?". Pick the line that sounds like you (an online system, a spreadsheet on your computer, a report your software emails, a file you export) and follow the steps. The best ways need nothing done afterwards. If you can only export a file, upload it when there is a new one; Steadywork emails you before a scheduled run when no new file has arrived.
Can my bookkeeper or assistant look after our automations?
Yes, from their own login, without your password. Open Account, "People who help you", and invite them by email. You choose whether they may also approve and send drafts. Billing, security and who may help stay with you, everything they do is in your activity record with their name, and you can remove them at any time. You can also ask Steadywork to set it up with you from the same page.
I am a bookkeeper. Can I look after my clients here?
Yes. Open "Your clients" from the menu. Invite a business by email or share your own link; each business decides whether you may help, and whether you may approve and send. Press Open on a business to work in its account; a banner shows whose account you are in, with the way back. If a client uses two-step sign-in, you need it too.
Do I have to tell every automation the same thing?
No. When you add a rule on an automation's page, it applies to all your email automations (or all your document ones), including ones you make later, unless you choose "Just this one". You can also add one under Account, "What it has learned", "How you like things". An address you leave out there is never written to by any automation. To keep one automation different, open it and press "Not for this one" next to the preference.
Does Steadywork learn what I like on its own?
It notices when you make the same change in two or more automations: the same rule set by hand, the same person left out, a sentence you keep deleting or adding, or drafts you keep shortening. It then asks once, at the top of your account page, whether to make it a preference for all of them. Nothing changes until you say yes, and a no is remembered, so it does not ask again. This is counted from your own decisions, not by the AI, and uses no credits. Edits made by a helper or a colleague do not count as yours.
In a team, do my preferences change my colleagues' drafts?
No. Your preferences change only your own automations. The team's owner can share a preference with everyone; it then applies to everyone's automations while they are in the team, and stops applying when someone leaves. A shared way of writing can be switched off for one automation on its page; a shared "never write to" address always applies.
What has Steadywork learned about us?
Open Account, "What it has learned". It lists, for each automation, the rules you set, the drafts it follows as examples, the corrections it has learned from and the settings you chose, and what it knows about your business: connected systems, accepted senders and people who will never be emailed. All of it comes from your own choices, and each item can be changed on the automation's page.
What if more than 25 need a draft?
Each run prepares up to 25, so you can check them in one sitting. The most urgent come first (for money owed, the longest overdue, then the largest), and you are told how many are left. The rest are prepared on the next run, or press "Prepare the next batch now" on the drafts page. The next batch moves on to the next ones: nobody already drafted in that round is drafted twice. To change any of this, open the automation and look under "How many at a time, and which first": a smaller batch, a different order, the next batch as soon as you have dealt with one, or every batch at once.
Can I control how much of our credits each person uses?
Yes, if you lead a team. On Plan and credits, under "How your team shares credits", choose one shared pool, equal shares, or a percentage for each person. When someone uses up their share, their AI work pauses until the month renews and you get an email; nobody else is affected. Credits you buy on top are a reserve for anyone who has run out.
Can I use it from Claude or ChatGPT?
Yes. Under Account, "Use with Claude or ChatGPT", create your private link and add it to your AI as a connector; the page gives the steps. You can then ask your AI what is waiting, have it read you a draft, run an automation, or pause everything. It cannot approve or send anything: what it prepares arrives in Drafts for you to check as usual.
Can it create invoices or estimates?
Yes, in QuickBooks. Choose "An invoice to create in the books" or "An estimate to create in the books" when you create an automation. Each one waits on its own screen showing exactly what will be created, and is made once when you confirm. It is created in your books but not sent to the customer; you send it from QuickBooks. The customer and the product or service must already exist in your books under exactly the same names.
Can it follow up if someone does not respond?
Yes. On the automation's tuning page, open "Follow-up steps". Say how many days to wait before each follow-up and how each should read, for up to three follow-ups after the first email. Each time it runs, people still on your list who are due get the next step; nobody is written to early. After the last step it stops writing to them and emails you their names, so you can pick up the phone. An email counts once it is sent or filed from here, or once you approve it if you send your emails yourself.
Can it copy someone in, sign off as me, or always attach a file?
Yes to all three. Your signature is saved once, under Automations, "Email settings", and goes on the end of every email. On an automation's tuning page, "Copy someone in" adds up to three addresses to every email it sends, and "Always attach a file" adds up to two files, such as a price list or a form. Each draft shows who is copied and what is attached before anything goes out.
Can it post to Slack or Teams, or send results to another tool?
Yes. Under Connections, open "Send to other tools". The page walks you through getting an address from Slack, Teams, Zapier or Make and saving it here, with a button to send a test. Then create an automation and choose "Something to send to another tool". Each item waits for you to confirm it, like any other entry, and is sent once.
Can it change a row in a sheet instead of adding one?
Yes, in Google Sheets and Smartsheet. Choose "A change to a row already in a sheet" when you create the automation, say which sheet, and name the column that tells rows apart, such as a job number. A row is changed only when exactly one row matches, and only after you confirm the change.
Can one automation read more than one thing?
Yes, as many as the job needs. When you create it, open "It needs to read more than one thing" under "What it reads" and press "Add another thing to read" for each one. Everything you add is read again on every run, so the more it reads, the more credits each run uses. If a run would read too much at once it stops and tells you; split the job into two automations and let one read what the other produced. For example: unpaid invoices from your books, and a sheet of customers to leave alone.
Can it run once a month?
Yes. Under "When", choose "Every month" and pick the day: any day from the 1st to the 28th, or the last day of the month.
Can someone else in my team check the drafts?
Yes. On the automation's tuning page, under "Who reviews the drafts", choose a teammate. From the next run its drafts go to them, and they are told by email. What they approve goes out through your mailbox and systems, as it would for you. Choose "Me" to take it back.
How many automations can I have?
Up to 25 for each person.
Can one automation use what another produced?
Yes. When you create an automation, choose "What another automation produced" under "What it reads", and "When new data arrives" under "When". It then runs each time the first one finishes. Several can read the same one, so one report can lead to several steps: a summary, a reorder list, emails to suppliers. A step that checks and finds nothing to do says so on its page and does not start the steps after it.
How do I pause everything?
On the Automations page, "Pause everything" stops every scheduled and automatic run until you press Resume. Each automation keeps its own settings, and pressing Run on one still works.
What time zone does it use?
The one shown on the Automations page under "Times are in". Change it there. Scheduled runs and appointment times follow it.
What is the Monday email?
A short summary of what your automations did in the last seven days: how much was handled, the estimate of time given back, what is waiting for you, and anything that did not finish. Switch it off at the bottom of your dashboard.
Staying inside the rules
Who is responsible for following the law?
You are. You know your business, your trade and where you operate; Steadywork does not. That covers, for example, the rules on marketing email, collecting money you are owed, asking for reviews, privacy and employing people. The app has helpers for some of this, described below, but they are aids and not legal advice. If you are unsure whether something is allowed, ask your own adviser before you do it.
What is a marketing email, and why does it matter?
An email whose main purpose is to promote your business: an offer, a "we miss you", a request for a review, a reminder that a service is due. An email about something the customer already bought or asked for, such as an invoice or an appointment, is not. US law asks that each marketing email carries your postal address and a way to opt out, and that you stop writing to anyone who opts out.
What does the app do about that?
When you mark an automation as marketing email (a tick-box when you create it, or on its tuning page), every email from it ends with your business name, your postal address and a link the person can use to opt out. Anyone who opts out goes on your do-not-email list, and marketing automations stop writing to them. It will not run until you have entered a postal address under Automations, "Email settings".
Someone told me directly to stop emailing them.
Add them yourself: Automations, "Email settings", "People who have opted out". Only take someone off that list if they ask you to start again.
Can I use it for patient or card information?
No. Do not put in patient health records, payment card numbers, Social Security numbers or information about children. The app is not built for them.
Why was I asked to agree to the Terms again?
Because they changed. You are asked once each time they do, and the date you agreed is kept with your account.
When something goes wrong
An automation stopped working. What now?
Open Automations. Anything that needs attention is marked, with the reason and what to do. An automation that fails five times in a row is paused and you are emailed; fix the cause and press Resume.
It runs but the drafts are wrong.
Open its tuning page. "Look for patterns in what I changed" suggests rules from your corrections. You can also add a rule by hand, sharpen the instruction, or try a more capable model.
The dashboard shows no time saved.
It needs to know how long the job took you by hand. Set that on the automation's tuning page under "Measure it".
I am covering for a colleague. Where do I look?
Automations shows what has been handed to you, with a handover that explains the job, its rules and what to check.